ROLLEX HIGHLINE CARABINER PULLEY
ROLLEX highline pulley carabiner
ROLLEX, the lightest aluminum carabiner with a 1 inch roll. A roll that runs on 2 ball bearings (SS version has stainless steel bearings), which guarantees smooth sliding movements. The single surface aluminum roll also prevents jamming your the line between bearings. The surface of the roll is perfectly smooth without leaving any pressure marks on your slackline.
The gate opening reaches up to 24 mm width, to leave the maximum entry space for the webbing.
ROLLEX is compatible with all slacklines from 24 to 26 mm width.
Optimized body shape of the ROLLEX
The shape of the ROLLEX body has been optimized for high strength usage, while stating only little weight of 129 gr.
The ROLLEX gate has a keylock shape in order to avoid snagging while clipping it to the line or harness.
NEVER DROP YOUR ROLLEX! - The the small lanyard hole under the gate allows you to tie it off safely with a 3 mm cord to your harness. This way you avoid dropoing your precious ROLLEX while clipping yourself to a highline.
ROLLEX' smart slot for BUCKINGHAM & SLIDE STOP
Above the pulley roll you'll find a slot for a 2.5 cm webbing. You can fill the slackline through this slot and easily create an independent tensioning system in combination with a clutch device such as LINEGRIP, SNATCH or equivalent.
But this slot on the top of your ROLLEX also serves as placement for our so called SLIDE STOP, which allows brakeable and controlled sliding on a highline.
The SLIDE STOP is very handy while taping the main line and backup, it prevents slipping over the line so you can use both of your hands for taping. Also, you can use the SLIDE STOP to rest while moving across a long line.
ROLLEX SG with screw nut gate
ROLLEX is available as a CLASSIC model with automatic lever, or as ROLLEX SG with screw nut gate. The ROLLEX SG' screw nut is compatible with the rear hole of a LINEGRIP in all versions (even line grip 4th generation).
Go on vacation with ROLLEX SS stainless steel
ROLLEX SS means stainless steel ball bearings, to be used even near the sea without oxidizing consequences.
ROLLEX is simply a new, advanced webbing pulley. Start your jorney and spin it up!
Warning
ROLLEX is certified EN 12275 standard. You always have to use a safety leash or another carabiner with opposing gate while sliding on a highline using a ROLLEX. Carefully read the instruction manual and follow the usage instructions described.
ROLLEX highline pulley carabiner
ROLLEX, the lightest aluminum carabiner with a 1 inch roll. A roll that runs on 2 ball bearings (SS version has stainless steel bearings), which guarantees smooth sliding movements. The single surface aluminum roll also prevents jamming your the line between bearings. The surface of the roll is perfectly smooth without leaving any pressure marks on your slackline.
The gate opening reaches up to 24 mm width, to leave the maximum entry space for the webbing.
ROLLEX is compatible with all slacklines from 24 to 26 mm width.
Optimized body shape of the ROLLEX
The shape of the ROLLEX body has been optimized for high strength usage, while stating only little weight of 129 gr.
The ROLLEX gate has a keylock shape in order to avoid snagging while clipping it to the line or harness.
NEVER DROP YOUR ROLLEX! - The the small lanyard hole under the gate allows you to tie it off safely with a 3 mm cord to your harness. This way you avoid dropoing your precious ROLLEX while clipping yourself to a highline.
ROLLEX' smart slot for BUCKINGHAM & SLIDE STOP
Above the pulley roll you'll find a slot for a 2.5 cm webbing. You can fill the slackline through this slot and easily create an independent tensioning system in combination with a clutch device such as LINEGRIP, SNATCH or equivalent.
But this slot on the top of your ROLLEX also serves as placement for our so called SLIDE STOP, which allows brakeable and controlled sliding on a highline.
The SLIDE STOP is very handy while taping the main line and backup, it prevents slipping over the line so you can use both of your hands for taping. Also, you can use the SLIDE STOP to rest while moving across a long line.
ROLLEX SG with screw nut gate
ROLLEX is available as a CLASSIC model with automatic lever, or as ROLLEX SG with screw nut gate. The ROLLEX SG' screw nut is compatible with the rear hole of a LINEGRIP in all versions (even line grip 4th generation).
Go on vacation with ROLLEX SS stainless steel
ROLLEX SS means stainless steel ball bearings, to be used even near the sea without oxidizing consequences.
ROLLEX is simply a new, advanced webbing pulley. Start your jorney and spin it up!
Warning
ROLLEX is certified EN 12275 standard. You always have to use a safety leash or another carabiner with opposing gate while sliding on a highline using a ROLLEX. Carefully read the instruction manual and follow the usage instructions described.